WA-V168 series vibration meter can measure vibration of rotating machinery, etc. It can measure vibration acceleration, effective value of vibration speed and peak-to-peak displacement, and measure temperature by infrared. It has the characteristics of easy operation and portability. It is mainly used for quick inspection of steam energy generators, hydraulic energy machines, motors, fans, pumps, compressors, machine tools and other equipment, and can also be used for preventive inspection of mechanical equipment failures. The measured values Of the vibration measuring instrument are directly displayed on the LCD; the instrument can provide an AC signal output socket for recording and analysis of vibration signals. When measuring, just hold the instrument, contact the tip of the instrument with the object being measured, and press and hold the VIB MEAS key.

Sensor: Piezoelectric acceleration type

Measuring range:

Acceleration: 0.1~199.9 m/s² Peak(RMS×1.414)

Velocity: 0.1~199.9 mm/s RMS

Displacement：   0.001~1.999 mm     P-P(RMS×2.828)

Measuring accuracy: ±5% + 2 word reading (% + word)

Frequency measurement vibration range:

acceleration：10Hz~ 1kHz(LO)

1kHz~ 15kHz(HI)

Velocity：   10Hz- 1kHz

Displacement:10Hz- 1kHz

Temperature measurement range: -20 °C ~ + 260 °C (± 3% ± 2 words)

Temperature measures focal length：25cm ±5cm

Battery: Nanfu dry battery (LR03 1.5V) 3pcs

Power consumption: 4.5V, less than 38mA, approximately 40 hours of use

Environment: temperature - 10C ~ + 50C   relative humidity 30RH ~ 90RH

Display mode: 4-bit liquid crystal display